Skip to navigation Skip to content

Mounting Boom | Antenna, S1/WindSensor

Mount NRG S1 and WindSensor P2546-OPR Anemometers on NRG 50m and 60m XHD TallTowers in compliance with Annex G of the IEC 61400-12-1 Ed. 1 (2005) and Ed. 2 (2017) standards with this antenna boom.

  • Mounting Boom | Antenna, S1/WindSensor
  • Mounting Boom | Antenna, S1/WindSensor
  • Thumbnail for

Configuration Options

The NRG Mounting Boom | Antenna, S1/WindSensor mounts NRG S1 and WindSensor P2546-OPR Anemometers on NRG 50m and 60m XHD TallTowers. Anemometer cups are positioned at exactly 50.4m and 60.2m heights, respectively. This mounting arrangement complies with guidelines provided in Annex G of both editions of the IEC 61400-12-1 standard.

This mounting solution is well suited for traditional wind resource assessment campaigns as well as Edition 2 power performance tests at operating wind farms in conjunction with a remote sensing device.

NRG tubular tilt-up towers allow companies to perform both internal and contractual power performance testing in a way that does not require the installation of a permanent met tower. No permanent foundations or long-term permitting is needed. These towers reduce the overall cost of the test, allow for short lead times (typically less than a week), and come in an efficient and portable single package, offering more logistical flexibility for wind farm developers and operators working in remote locations.

  • One (1) Antenna Boom structure with mounting hardware
  • One (1) stem for an S1/WindSensor P2546-OPR Anemometer
  Antenna, NRG S1 + WindSensor, All Towers (#15971)
Boom type NRG S1 and WindSensor Anemometer mounting boom for top of NRG 50m and 60m XHD, Super 60m & 80m TallTowers with Standard Footprint
Applications Wind speed measurement compliant to IEC 61400-12-1 Ed. 1 (2005) and Ed. 2 (2017), including power performance testing.
Sensor compatibility
  • NRG S1 Anemometer
  • WindSensor P2546-OPR Anemometer
Tower compatibility
  • NRG Systems 50m/60m XHD
  • Super 60m & 80m TallTowers
Mounting Boom attaches to tower with stainless steel U-bolts
Anemometer mounts to stem with set screws
Tools required
  • 9/16" combination wrench
  • 9/16" deep socket & ratchet
  • 1/8" hex key or 1/8" hex key socket
  • 3mm hex key
Lifespan 2+ Years
Boom diameter Boom: 48.3mm (1.90 inches)
Stem: 25.4 mm (1 inch)
Offset distance Sensor positioned above tower center point
Offset height Anemometer cup position:
  • 50.4m on NRG 50m XHD TallTowers
  • 60.2m on NRG 60m XHD TallTowers
  • 0.88m above mounting stem adapter (WindSensor)
  • 0.80m above mounting stem adapter (S1)
  • 1.93m above top of tower (WindSensor)
  • 1.86m above top of tower (S1)
Boom Boom: Aluminum
Stem: Aluminum
U-bolts Stainless Steel

Customer Service

+1 802-482-2255

Mon – Fri: 8:30am – 5:00pm Eastern Time (GMT-5)