Skip to navigation Skip to content
Quick Guide Videos


To view and modify the LOGR-S Serial Port settings:

1. Navigate to Sensors > Serial Ports Setup

2. Confirm port settings for COM-A and COM-B match modbus settings for desired sensors

Default settings for both COM-A and COM-B:

   • Baud Rate - 19200

   • Stop Bits - 1

   • Data Bits - 8

   • Parity - Even

3. Select Save

4. Listen for an audible alert (two beeps) from the LOGR-S confirming Serial Port Setup has been saved

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.