LOGR-S | CALCULATED CHANNEL - ALBEDO

To configure a Calculated Channel for Albedo:

1. Navigate to Sensors > Calculated Channels

2. Select Configure on the desired channel

3. Select Albedo from the Calculation dropdown menu

4. Select RHI and GHI inputs from their respective dropdown menus

5. Click Save

6. Listen for an audible alert (two beeps) from LOGR-S confirming the calculated channel has been configured

7. Confirm the calculation is on the desired channel on the Calculated Channels page

8. Confirm a valid real-time reading appears on the Status > Sensor Outputs page