Skip to navigation Skip to content
Instruction Sheets

WindSensor Cable Termination

Download pdf (533 KB)

These instructions illustrate how to terminate a male LEMO Push-Pull connector to 2 conductor cable for use with a WindSensor P2546-OPR anemometer (either "A" or "C" model). Termination of this connector requires precise cable stripping and soldering equipment. When properly terminated, the resulting connection should provide reliable, weatherproof performance for the duration of the measurement campaign.


Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.