Skip to navigation Skip to content
White Papers

Post Calibrating the 40C Anemometer in the SOH Wind Engineering (SOH WE) Wind Tunnel

Published on October 8, 2013

Download pdf (1.4 MB)

Through October 2012, all 40C non-MEASNET initial production calibrations have been carried out in the Otech Engineering wind tunnels. Some users of 40C Anemometers have had calibrations performed on these anemometers after field-deployment as a quality check. The calibrations performed after field-deployment are often referred to as “post-calibrations” and are typically performed in the same wind tunnel as the initial calibration (to remove tunnel-to-tunnel bias in the result).

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
R2 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.