Skip to navigation Skip to content
FAQs

Using a 40H instead of a regular 40C

The 40H (Hall effect) is to be used for data acquisition systems that require a square wave input signal. It is typically easier to interface the #40H to digital systems and the #40H has somewhat better noise immunity than a regular #40 when used in electrically noisy environments.

 

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.