Skip to navigation Skip to content
FAQs

Installing TallTowers on a slope

80m XHD and Super 60m XHD TallTowers can be installed on slopes up to 3°. 60m XHD, 50m XHD, 34m, and 10m TallTowers can be installed on slopes up to 10°.

When laying out a TallTower installation on a slope, measure the tabulated distances along the ground to place the anchors. It is not necessary to compensate for the slope. TallTower guy wires are cut long enough to allow for installation on slopes while maintaining the ideal angle between the tower and the guys.

 

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.