Skip to navigation Skip to content

Connecting extra PV panels to the iPack

Under most conditions, the normal Symphonie PV Panel | 15W provides adequate solar charging for the iPack. On very rare occasions, certain users have asked if they can go to 20W of PV. Although generally unnecessary, in some situations it may be advantageous to add a 5W PV panel to create a total of 20W.

The only situation where it might not be a good idea to use this size panel is if the iPack battery is completely dead and the 20W panel is connected on a day with very bright sun, causing it to generate the maximum amount of power. This could cause the charge controller to overheat. However, under normal circumstances (connecting the 20W solar panel to an iPack with a healthy, charged battery), this is not an issue and using the 20W panel will not cause any damage to the iPack.

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.