Skip to navigation Skip to content
Instruction Sheets

Testing BP20 Barometric Pressure Sensor

Download pdf (365 KB)

The BP20 barometric pressure sensor uses an absolute pressure transducer. By checking the voltage output and current draw of the sensor its health can be determined. The BP20 will run on an excitation voltage
from 7 to 35 V DC and will draw approximately 8mA.

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.