PV Panel Assembly for Remote Power System
When performing an off-grid measurement campaign, use of a Remote Power Supply (RPS) solution is sometimes required. Sizing the power supply is dependent on the site location (climate), days of desired autonomy, and number of sensors being installed. Please consult your NRG Systems representative to discuss RPS sizing for your specific installation.
These instructions explain how to mount the booms and PV panel(s) (Kits #14414, 14415, & 14416) to an NRG Systems Solar Tower. These kits can be connected to one of several different pre-assembled Control Boxes, depending on the application.
Related Products/Accessories
Download Calibration Reports
Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:
NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer
Tech Support
Whether you are troubleshooting in the field or learning how to install a product, we are here for you.