
Data Logger Accessories
Our selection of communications modules, batteries, and protective equipment will keep your NRG data loggers running in the field.
All NRG accessories are covered by our two-year warranty and lifetime technical support.
Communications + Autonomous Power Modules

Symphonie® iPackACCESS | BGAN M2M Satellite
Count on worldwide, worry-free remote communications and continuous power for your SymphoniePRO Data Logger with the Symphonie iPackACCESS | BGAN M2M Satellite kit.

Symphonie® iPackGPS | 4G LTE-VZW
Automate the transfer of measurement data from the field to your desktop via Verizon's 4G LTE network.

Symphonie® iPackGPS | 3G GSM
Automate the transfer of measurement data from the project site to your desktop through a 2G or 3G GSM network.

Symphonie® iPackGPS | 4G LTE-ATT
Automate the transfer of measurement data from the field to your desktop via AT&T's 3G or 4G LTE network.

Symphonie® iPackGPS | 2G GSM/GPRS
Automate the transfer of measurement data from the project site to your desktop through a GSM/GPRS network.

Symphonie® iPackGPS | 4G LTE-TDD
Automate the transfer of measurement data from the field to your desktop through a 4G LTE-TDD network.

Symphonie® iPackACCESS
Integrate real-time meteorological data into your SCADA (Supervisory Control and Data Acquisition) system with the iPackACCESS communications module.

Symphonie® iPack | Power Only
Choose this iPack when a remote power source is needed, but remote data transfer is not.

Symphonie® iPackGPS | Iridium
Automate the transfer of measurement data from the project site to your desktop through the Iridium satellite network.
Power + Signal

Symphonie® iPack Battery Replacement Kit
Use one of these kits to replace the battery in your Symphonie iPackGPS.

Symphonie® Yagi Antenna
The Symphonie Yagi Antenna is compatible with Symphonie series data loggers equipped with a CDMA or GSM iPack.

Symphonie PV Panel | 15W
The Symphonie PV Panel continuously charges the 12 V battery in your iPackGPS or iPack | Power Only, converting energy from available sunlight.
Programming Kits

Symphonie® iPack Programming Kit
Use this kit to program iPacks and Symphonie® series data loggers (SymphoniePLUS3 and older).

USB Cable | 15 FT, A to B Type
Use this USB cable to configure the SymphoniePRO data logger and corresponding Symphonie iPacks.
Protection + Security

Symphonie® Shelter Box | FRP
Protect your Symphonie series data logger and iPack from the elements with this fiberglass shelter box.

Shelter Box Combination Lock
Deter potential vandals from interfering with your data logger.

Desiccant Pack
Protect your Symphonie® series data logger from moisture with this desiccant pack.
Memory Cards

Multimedia Card (MMC), 16MB
This 16MB Flash Multimedia Card is designed for use with Symphonie® Classic and SymphoniePLUS data loggers.

Symphonie® Memory Card Reader
Easily transfer files from your data logger’s memory card to your computer.

SD Card, 128MB
This 128MB SD Card is designed for use with the SymphoniePLUS®3 Data Logger.

SD Card | 512MB for SymphoniePRO
This 512 MB SD card is designed for use with SymphoniePRO data loggers.

SD Card | 2GB for SymphoniePRO
This 2 GB SD card is designed for use with SymphoniePRO data loggers configured to collect large amounts of data.
Signal Conditioning Modules

Symphonie® SCM Card
Condition your sensor’s output signal so that a SymphoniePLUS3 Data Logger can read it by installing a Symphonie Signal Conditioning Module (SCM).
Wiring Panels

Data Logger Wiring Panel Kits
Connect sensors and protect your data logger from electrostatic discharge with an NRG wiring panel.