Symphonie PV Panel | 15W
The Symphonie PV Panel continuously charges the 12 V battery in your iPackGPS or iPack | Power Only, converting energy from available sunlight.
Maintain adequate energy levels for your data logger and communications instruments with a Symphonie PV Panel. Two configurations are available with the appropriate hardware to mount on your tower of choice, whether it is an NRG TallTower or third-party lattice mast. This 15 W PV panel features an adjustable mounting bracket, allowing you to adjust the angle of your PV panel to optimize the charging efficiency at your site’s latitude.
Each PV panel comes with a power cable for connection to your iPack’s PV terminals to charge the internal 12 V battery. This configuration keeps the sealed lead-acid batteries continuously charged—ensuring reliable data logging and communications operations.
Use of this 15 W PV panel paired with an iPack is always recommended to reliably power the long-term autonomous operation of the SymphoniePRO® Data Logger - Wind. In addition, certain sensors require excitation voltage greater than what is available from your data logger alone, in which case you must use an iPack in conjunction with a Symphonie PV Panel to provide the necessary additional power. The following sensors require the iPack’s 12 V power supply:
- NRG BP20 Barometric Pressure Sensor
- NRG RH5X Relative Humidity Sensor
- Tipping Bucket Rain Gauge
- NRG 40H Anemometer
- WindSensor P2546-OPR Anemometer
- Thies First Class Advanced Anemometer
Note: You can also use our 5W Symphonie PV Panel when deploying a SymphoniePLUS®3 Data Logger.
Specifications Print Specs
|15W, Lattice (#9111)||15W, Tubular (#9112)|
|General||15 W Solar Photovoltaic (PV) Panel with mounting bracket and hardware||15 W Solar Photovoltaic (PV) Panel with mounting bracket and hardware|
|Applications||Continuous battery charging for long-term autonomous operation of Symphonie series data loggers||Continuous battery charging for long-term autonomous operation of Symphonie series data loggers|
|System Compatibility||Compatible with all Symphonie iPacks and Data Loggers||Compatible with all Symphonie iPacks and Data Loggers|
|Tools required||8 mm (5/16 in.) wrench or nut driver for hose clamps||8 mm (5/16 in.) wrench or nut driver for hose clamps|
|Weight||2.0 kg (4.4 lb)||2.0 kg (4.4 lb)|
|Size||43.8 cm x 28.0 cm x 2.8 cm (17.2 in. x 11.0 in. x 1.1 in.)||43.8 cm x 28.0 cm x 2.8 cm (17.2 in. x 11.0 in. x 1.1 in.)|
|Peak Power (Pmp)||15 W||15 W|
|Maximum Power Voltage (Vmp)||17.28 V||17.28 V|
|Maximum Power Current (Imp)||0.87 A||0.87 A|
|Short Circuit Current (Isc)||0.90 A||0.90 A|
|Open Circuit Voltage (Voc)||21.60 V||21.60 V|
|Warranty||2 years||2 years|