Skip to navigation Skip to content
Sensor Accessories

Sensor Accessories

Pair your NRG anemometers and wind vanes with the right accessories for your project to get the most out of your sensors. Designed for durability and ease of use, our sensor accessories are field-proven and ready to ship to your site or office within days of your order.

All NRG accessories are covered by our two-year warranty and lifetime technical support.

Thies Cable

Thies Cable

Use these cables with Thies First Class Advanced Anemometers.

Interface 40C to Logic Level, Speed Amp #892E

Interface 40C to Logic Level, Speed Amp #892E

Convert the 40C Anemometer from AC sine wave to square wave.

Interface #40 to Voltage, #SI5100

Interface #40 to Voltage, #SI5100

Interface the 40C Anemometer with an analog device such as a computer, meter, or recorder.

Hybrid XT Personality Module

Hybrid XT Personality Module

Convert the frequency output of the Hybrid XT sensor to the signal that your wind turbine controller requires.

Transformer - IceFree3 Sensors

Transformer - IceFree3 Sensors

Use this transformer with IceFree3 heated sensors to convert 120/240 VAC to 24 VAC.

Power Cable Kit - IceFree3 Sensor 2C + 3C

Power Cable Kit - IceFree3 Sensor 2C + 3C

This kit provides a junction box and cabling to extend the standard power and signal cables included with the IceFree3 Anemometer and the IceFree3 Vane.

Power Cable Kit - IceFree3 Sensor 2C

Power Cable Kit - IceFree3 Sensor 2C

These cables provide the power for the heating element in our IceFree3 Heated Anemometers and come in a variety of lengths.

Power Cable Kit - IceFree3 Sensor 3C

Power Cable Kit - IceFree3 Sensor 3C

These cables provide the power for the heating element in our IceFree3 Heated Vanes and come in a variety of lengths.

Sensor Cable Kit - 2C

Sensor Cable Kit - 2C

Use this two-conductor (2C) cable for unheated anemometers.

Sensor Cable Kit - 3C

Sensor Cable Kit - 3C

Use this three-conductor (3C) cable for unheated vanes and Hall Effect anemometers.

Sensor Terminal Boot

Sensor Terminal Boot

Protect your sensor terminal from exposure to the elements with a terminal boot.

WindSensor Cable

WindSensor Cable

Use these cables with WindSensor P2546-OPR Anemometers.