Why an iPack is needed to power BP20, RH-5, and RH5X sensors on Symphonie
The NRG BP20 sensor requires a supply voltage between 7 and 35 volts while the RH-5 and RH5X require a supply voltage between 10 and 36 volts. A Symphonie logger cannot supply these voltages without an iPack.
The iPack contains a 2300 mA-hr 12 V sealed rechargeable battery in order to power communications (phones) and these sensors.
Related Products/Accessories
Download Calibration Reports
Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:
NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
R2 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer
Tech Support
Whether you are troubleshooting in the field or learning how to install a product, we are here for you.