Symphonie display is completely black
Rev. 9 Symphonie firmware changes the default contrast setting in case the contrast setting set by the user is lost. Prior firmware versions did not do this, and loss of the contrast setting can result in a completely black LCD screen.
To change the contrast setting, press [Home], [3], [2], and then use the up and down arrow keys to adjust the contrast. Then press [Set] to confirm the new setting.
Download Calibration Reports
Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:
NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
R2 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer
Tech Support
Whether you are troubleshooting in the field or learning how to install a product, we are here for you.