Speed Amp #892E Anemometer Interface
The #892E Anemometer Interface is an electronic module designed to interface the NRG #40 anemometer to data acquisition systems with frequency input capabilities. The module converts the anemometer signal to a higher voltage square wave with the same frequency as the input sine wave from the anemometer. This provides a high-level square wave signal with frequency proportional to wind speed.
Related Products/Accessories
Download Calibration Reports
Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:
NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer
Tech Support
Whether you are troubleshooting in the field or learning how to install a product, we are here for you.