Skip to navigation Skip to content
Quick Guide Videos

SymphoniePRO App | Updating Logger and iPack firmware

To update Firmware there needs to be a connection (USB or Metlink) to the iPack.
(Note: When updating firmware, the Logger firmware update should always be done before iPack firmware updates).

To update Logger firmware:

1. Select the Logger Tab under the instruments panel.

2. Select Upgrade Logger Firmware within the Configuration window.

3. Select Browse to find the recently downloaded firmware file within your firmware folder.

4. Select the desired firmware file.

5. Select Start Upgrade

(Note: The downloaded firmware can also be applied to the Automation page for either iPack or Logger and firmware will be installed during the next Metlink Connection).



Updating iPack firmware works similarly.

To update iPack firmware:

1. Select the iPack Tab under the instruments panel.

2. Select Upgrade iPack Firmware with the Configuration window.

3. Select Browse to find the recently downloaded firmware file within your firmware folder.

4. Select the desired firmware file.

5. Select Start Upgrade

(Note: The downloaded firmware can also be applied to the Automation page for either iPack or Logger and firmware will be installed during the next Metlink Connection).

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
HybridMC
HybridXT
PVT1 PV Temperature Sensor
60 + T60C Temperature Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.