Skip to navigation Skip to content
Quick Guide Videos

NRG S1 Anemometer | Initial Setup

  1. Lay out cables and required tools:

    NRG Flat Head Screw Driver
    Hex Driver
    1/2" Open End Wrench



  2. Remove sensor from box.



  3. Pull cable-end through boom. Attach to sensor and tighten with wrench. Mount sensor on boom and tighten with hex driver.



  4. Connect sensor to SymphoniePRO wiring panel. Use channels 1-12.

  5. Sensor is ready.

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
HybridMC
HybridXT
T60 + T60C Temperature Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.