NRG Class 1 | Initial Setup
- Lay out cables and required tools:
Small NRG screw driver
Phillips screw driver
¼” nut driver
- Remove sensor from box.
- Pull cable-ends through the small opening in the boot and remove cotter pin.
- Connect sensor to SymphoniePRO wiring panel.
- Mount sensor on boom. Insert cotter pin. Tighten set screw.
Download Calibration Reports
Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
PVT1 PV Temperature Sensor
60 + T60C Temperature Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer
Whether you are troubleshooting in the field or learning how to install a product, we are here for you.