Where should I mount my RH-5 Relative Humidity Sensor?
The RH-5 Relative Humidity Sensor has two mounting brackets that are set up to mount to the bottom of a plate or bracket. While there are a few practical ways to mount the RH-5, most of our customers attach it to the bottom of the logger's shelter box.
To do this, you will need to drill two holes using a #18 bit (3/16" will work). Position the holes 3.500 inches apart (8.89cm) on center.
Related Products/Accessories
Download Calibration Reports
Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:
NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer
Tech Support
Whether you are troubleshooting in the field or learning how to install a product, we are here for you.