Skip to navigation Skip to content
FAQs

Using a long cable with a 200P wind vane

We have tested the #200P with cables up to 1525m (5000 ft.). While there is no degradation of signal strength or sensor accuracy, longer cables always increase the risk of electrical noise.

Splice points should be carefully covered in heat shrink tubing or high quality electrical tape appropriate for outdoor use. In electrically noisy environments, long cables should be avoided.

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
HybridMC
HybridXT
PVT1 PV Temperature Sensor
60 + T60C Temperature Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.