Skip to navigation Skip to content
FAQs

Typical setup and power requirements for IceFree3 heated Wind Direction Vane

(1) - IceFree3 Electrically Heated Wind Direction Vane
(1) - Transformer - IceFree Sensors 120/240 - 12/24VAC
(1) - 3C Sensor Cable - Power Cable Kit
(1) - Mounting Boom - 3/4" IPT

Grid source of power is required; heaters accept 24 Volts AC or DC.

 

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.