Skip to navigation Skip to content
FAQs

No SIM installed: GSM iPack Returns message "unused" or "Bad GSM PIN Number"

If you forget to install the SIM in a GSM iPack, you may receive the message "unused" or "Bad GSM PIN Number". This may also occur if the SIM is installed improperly.

Instructions on how to install a SIM in your GSM iPack can be found in the Symphonie manual.

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.