Skip to navigation Skip to content
FAQs

Is Fixed IP supported in the GSM iPack?

Unfortunately, Fixed IP is not supported in the NRG GSM iPack. In order to conserve system power, all transfer is initiated by the iPack (modem) and a temporary IP is assigned during each session. It is not possible to access the iPack via a browser or other means.

The typical communication configuration is to use a Circuit Switched (dial-up) or GPRS (packet switched) connection to establish a PPP connection to the internet (through a provider). Once the PPP connection is established, an ISP is accessed for SMTP, POP and TimeServer.

Note: The SIM card must be configured appropriately for the connection type and service provider. Not all providers support dial-up and/or GPRS connections – be sure to ask what service is available before you configure your iPack.

 

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.