Skip to navigation Skip to content

How should I install the sensor boot to keep out water?

When installing #40C/#40H anemometers or 200P wind vanes it is important to use the included PVC boot. This ensures that the sensor will perform as designed, and helps to protect the terminals.

To keep water out, put a single wrap of weather-rated tape around the top of the boot and sensor; just be sure the tape doesn't interfere with the sensors rotating head.

Do not put tape around the bottom of the boot as it should be allowed to drain.


Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.