Hybrid XT Anemometer | WRA
Reliably measure wind speed in icing events and extreme weather with the Hybrid XT Anemometer | WRA.
Details
The Hybrid XT Anemometer | WRA features proven heated technology to support operational met towers being used for forecasting and analysis. NRG’s Hybrid XT technology is based on 20 years of icing climate sensor experience and over 70,000 fielded sensors. This sensor is well suited for use during icing events when other sensors may be frozen.
Hybrid XT sensors are engineered with a two-stage contamination protection system to prevent dust, dirt, and water from damaging the bearings. The first level of defense is a fully sealed body that minimizes contamination ingress. Inside, a sealed bearing cartridge system prevents contamination from affecting the bearings. The all-metal design conducts heat to the whole anemometer, preventing ice buildup that can affect sensor function. Heat is radiated to the sensor head using a 96W heater that provides ample de-icing power. The result: an extremely durable and reliable anemometer, even when faced with icing and other extreme weather conditions.
The Hybrid XT Anemometer | WRA comes with a 10 m cable. If a longer cable is required, we offer the Power Cable Kit – Hybrid XT | WRA Single Sensor for installing the Hybrid XT Anemometer | WRA independently, or the Power Cable Kit – Hybrid XT | WRA Dual Sensor if installing the anemometer alongside the Hybrid XT Vane | WRA.
Please note: There is a power draw difference when using the Hybrid XT Anemometer | WRA (40-51mA @ 12V, excluding heater) as a replacement for the NRG IceFree3 Heated Anemometer (0.1mW, excluding heater). This sensor is recommended for use with AC grid power only. If using a dual sensor configuration instead of a single sensor configuration, a different junction box is required. For off grid-power recommendations, please contact NRG Technical Services at support@nrgsystems.com for more details.
Benefits
Reliability
- Two-stage contamination protection extends sensor life
- Fully sealed sensor body minimizes dust, dirt, and water ingress
- Sealed cartridge bearing system prevents contamination from affecting the bearings
- Shock-resistant bearing mounting prevents damage caused by rough handling
- Rugged metal head prevents breakage due to accidental drops or icing
Icing Performance
- Metal sensor body conducts heat to the whole sensor, preventing ice buildup
- 96W heating element provides ample de-icing power
Anemometer Accuracy
- Accuracy: +/- (0.3 m/s + 2% of measured value)
- Starting threshold of < 2m/s
Specifications
Please call us at +1 802-482-2255 for specifications.
Product Support
Customer Service
+1 802-482-2255
Mon – Fri: 8:30am – 5:00pm Eastern Time (GMT-5)
Accessories
Power Cable Kit - Hybrid XT | WRA Single Sensor
This kit provides a junction box and cabling to extend the standard power and signal cables for either the Hybrid XT | WRA Anemometer or Hybrid XT | WRA Vane when used independently.
Power Cable Kit - Hybrid XT | WRA Dual Sensor
This kit provides a junction box and cabling to extend the standard power and signal cables when installing the Hybrid XT | WRA Anemometer and Hybrid XT | WRA Vane together.