- Home
- Products
- Accessories
- Wind Accessories
- Wind Mounting Booms
- Mounting Boom | 2.4m (95"), Lattice
Mounting Boom | 2.4m (95"), Lattice
Mount your anemometers and wind vanes on third-party lattice towers according to industry best practices.
Details
The 2.4m Lattice Mounting Boom mounts sensors on third-party lattice towers to minimize tower-induced flow distortions. The sensor extension mounts anemometers and wind vanes at a minimum of 20 boom diameters above the horizontal arm, which meets industry IEC 61400-12-1:2017 recommendations for tower and boom offset distances. This boom is still compact enough to ship via UPS—maximizing convenience and affordability.
NRG lattice booms can be purchased as a single boom or as a pair of booms with a fixed angular orientation between them (either 120 degrees or 180 degrees). Versatile tower mounting hardware facilitates secure alignment on the tower and allows the boom to be pivoted downward next to the tower for convenient sensor maintenance. The robust, dual-beam support structure is made from galvanized steel to resist corrosion.
One configuration mounts a single NRG S1 Anemometer (#14027). Three configurations mount one NRG Class 1 Anemometer, NRG 40C Anemometer, NRG 40H Anemometer, NRG 200M Wind Vane, , or WindSensor P2546-OPR Anemometer right out of the box (#7372, #7373, #7374). The remaining three configurations mount any WindSensor P2546-OPR Anemometer (#9334, #9335, #9336). To mount a Thies First Class Advanced Anemometer, add a Thies Adapter (#9344) to any WindSensor-compatible boom.
Older versions of this boom had a shorter sensor rise—please contact our sales team to inquire about legacy boom options if you need to match your current equipment.
Specifications Print Specs
| 2.4M (95"), LATTICE (#7372) | 2.4M (95"), 120 DEGREE, LATTICE (2) (#7374) | 2.4M (95"), LATTICE, WS (#9334) | MOUNTING BOOM 2.4M (95"), 180 DEGREE, LATTICE (2), WS (#9335) | 2.4M (95"), 120 DEGREE, LATTICE (2), WS (#9336) | 2.4M (95"), LATTICE (1), S1 (#14027) | |
|---|---|---|---|---|---|---|
| Description | ||||||
| Boom type | Sensor boom for mounting standard NRG sensors on third-party lattice towers | Double sensor boom for mounting standard NRG sensors on third-party lattice towers | Sensor boom for mounting first class anemometers on third-party lattice towers. | Double sensor boom for mounting first class anemometers on third-party lattice towers. | Double sensor boom for mounting first class anemometers on third-party lattice towers. | Sensor boom for mounting first class anemometers on third-party lattice towers. |
| Applications | Wind resource assessment; where long offset distances are required | Wind resource assessment; where long offset distances are required | Wind resource assessment; where long offset distances are required | Wind resource assessment; where long offset distances are required | Wind resource assessment; where long offset distances are required | Wind resource assessment; where long offset distances are required. |
| Sensor compatibility |
Single horizontal boom mounts any of the following sensors:
|
Double boom arrangement mounts any pair of the following sensors with 120 degree orientation between them:
|
Single horizontal boom mounts any of the following sensors:
|
Double horizontal boom mounts any pair of the following sensors with 180 degree orientation between them:
|
Double horizontal boom mounts any pair of the following sensors with 120 degree orientation between them:
|
Single horizontal boom mounts the following sensor:
|
| Tower compatibility |
Lattice Towers with:
|
Lattice Towers with:
|
Lattice Towers with:
|
Lattice Towers with:
|
Lattice Towers with:
|
Lattice Towers with:
|
| Installation | ||||||
| Mounting |
|
|
|
|
|
|
| Tools required |
|
|
|
|
|
|
| Recommended for installation |
|
|
|
|
|
|
| Environmental | ||||||
| Lifespan | 2 years + | 2 years + | 2 years + | 2 years + | 2 years + | 2 years + |
| Physical | ||||||
| Overall boom length | 2.4 m (95") | 2.4 m (95") | 2.4 m (95") | 2.4 m (95") | 2.4 m (95") | 2.4 m (95") |
| Boom diameter | 13 mm (0.5") at sensor mount location | 13 mm (0.5") at sensor mount location | 25 mm (0.98") at sensor mount location | 25 mm (0.98") at sensor mount location | 25 mm (0.98") at sensor mount location | 25 mm (0.98") at sensor mount location |
| Offset height |
40C cup height above horizontal boom arm: 508 mm (20.0") 200P wing height above horizontal boom arm: 520 mm (20.5") |
40C cup height above horizontal boom arm: 508 mm (20.0") 200P wing height above horizontal boom arm: 520 mm (20.5") |
Windsensor cup height above horizontal boom arm: 508 mm (20.0") Thies cup height above horizontal boom arm: 514 mm (20.2") |
Windsensor cup height above horizontal boom arm: 508 mm (20.0") Thies cup height above horizontal boom arm: 514 mm (20.2") |
Windsensor cup height above horizontal boom arm: 508 mm (20.0") Thies cup height above horizontal boom arm: 514 mm (20.2") |
S1 cup height above horizontal boom arm: 508 mm (20.0") |
| Materials | ||||||
| Boom | 15.8 mm (0.625") galvanized steel tube | 15.8 mm (0.625") galvanized steel tube | 15.8 mm (0.625") galvanized steel tube | 15.8 mm (0.625") galvanized steel tube | 15.8 mm (0.625") galvanized steel tube | 15.8 mm (0.625") galvanized steel tube |
| Universal mounting plate | Galvanized steel | Galvanized steel | Galvanized steel | Galvanized steel | Galvanized steel | Galvanized steel |
Description
- Boom type
- Sensor boom for mounting standard NRG sensors on third-party lattice towers
- Applications
- Wind resource assessment; where long offset distances are required
- Sensor compatibility
-
Single horizontal boom mounts any of the following sensors:
- NRG Class 1 Anemometer
- NRG 40C Anemometer
- NRG 200P Wind Direction Vane
- Tower compatibility
-
Lattice Towers with:
- Face width between 305 mm (12") and 610 mm (24")
- 38 mm (1.5") tube diameter
Installation
- Mounting
-
- Boom attaches to tower with stainless steel hose clamps
- Sensor mounts to boom with set screw and cotter pin
- Tools required
-
- 5/16 inch hex driver or flat blade (-) screwdriver for hose clamps
- Phillips head (+) screwdriver to mount sensor
- Recommended for installation
-
- Electric drill with 5/16 nut driver bit for tightening hose clamps
- Sheet metal shears or similar for trimming hose clamps
Environmental
- Lifespan
- 2 years +
Physical
- Overall boom length
- 2.4 m (95")
- Boom diameter
- 13 mm (0.5") at sensor mount location
- Offset height
-
40C cup height above horizontal boom arm:
508 mm (20.0")
200P wing height above horizontal boom arm:
520 mm (20.5")
Materials
- Boom
- 15.8 mm (0.625") galvanized steel tube
- Universal mounting plate
- Galvanized steel
Description
- Boom type
- Double sensor boom for mounting standard NRG sensors on third-party lattice towers
- Applications
- Wind resource assessment; where long offset distances are required
- Sensor compatibility
-
Double boom arrangement mounts any pair of the following sensors with 120 degree orientation between them:
- NRG Class 1 Anemometer
- NRG 40C Anemometer
- NRG 200P Wind Direction Vane
- Tower compatibility
-
Lattice Towers with:
- Face width between 305 mm (12") and 610 mm (24")
- 38 mm (1.5") tube diameter
Installation
- Mounting
-
- Boom attaches to tower with stainless steel hose clamps
- Sensor mounts to boom with set screw and cotter pin
- Tools required
-
- 5/16 inch hex driver or flat blade (-) screwdriver for hose clamps
- Phillips head (+) screwdriver to mount sensor
- Recommended for installation
-
- Electric drill with 5/16 nut driver bit for tightening hose clamps
- Sheet metal shears or similar for trimming hose clamps
Environmental
- Lifespan
- 2 years +
Physical
- Overall boom length
- 2.4 m (95")
- Boom diameter
- 13 mm (0.5") at sensor mount location
- Offset height
-
40C cup height above horizontal boom arm:
508 mm (20.0")
200P wing height above horizontal boom arm:
520 mm (20.5")
Materials
- Boom
- 15.8 mm (0.625") galvanized steel tube
- Universal mounting plate
- Galvanized steel
Description
- Boom type
- Sensor boom for mounting first class anemometers on third-party lattice towers.
- Applications
- Wind resource assessment; where long offset distances are required
- Sensor compatibility
-
Single horizontal boom mounts any of the following sensors:
- WindSensor P2546-OPR
- Thies First Class Advanced Anemometer (must also use one Thies Adapter, #9344)
- Tower compatibility
-
Lattice Towers with:
- Face width between 305 mm (12") and 610 mm (24")
- 38 mm (1.5") tube diameter
Installation
- Mounting
-
- Boom attaches to tower with stainless steel hose clamps
- Sensor mounts to boom with set screw and cotter pin
- Tools required
-
- 5/16 inch hex driver or flat blade (-) screwdriver for hose clamps
- Phillips head (+) screwdriver to mount sensor
- Recommended for installation
-
- Electric drill with 5/16 nut driver bit for tightening hose clamps
- Sheet metal shears or similar for trimming hose clamps
Environmental
- Lifespan
- 2 years +
Physical
- Overall boom length
- 2.4 m (95")
- Boom diameter
- 25 mm (0.98") at sensor mount location
- Offset height
-
Windsensor cup height above horizontal boom arm:
508 mm (20.0")
Thies cup height above horizontal boom arm:
514 mm (20.2")
Materials
- Boom
- 15.8 mm (0.625") galvanized steel tube
- Universal mounting plate
- Galvanized steel
Description
- Boom type
- Double sensor boom for mounting first class anemometers on third-party lattice towers.
- Applications
- Wind resource assessment; where long offset distances are required
- Sensor compatibility
-
Double horizontal boom mounts any pair of the following sensors with 180 degree orientation between them:
- WindSensor P2546-OPR Anemometer
- Thies First Class Advanced Anemometer (must also use one Thies Adapter, #9344)
- Tower compatibility
-
Lattice Towers with:
- Face width between 305 mm (12") and 610 mm (24")
- 38 mm (1.5") tube diameter
Installation
- Mounting
-
- Boom attaches to tower with stainless steel hose clamps
- Sensor mounts to boom with set screw and cotter pin
- Tools required
-
- 5/16 inch hex driver or flat blade (-) screwdriver for hose clamps
- Phillips head (+) screwdriver to mount sensor
- Recommended for installation
-
- Electric drill with 5/16 nut driver bit for tightening hose clamps
- Sheet metal shears or similar for trimming hose clamps
Environmental
- Lifespan
- 2 years +
Physical
- Overall boom length
- 2.4 m (95")
- Boom diameter
- 25 mm (0.98") at sensor mount location
- Offset height
-
Windsensor cup height above horizontal boom arm:
508 mm (20.0")
Thies cup height above horizontal boom arm:
514 mm (20.2")
Materials
- Boom
- 15.8 mm (0.625") galvanized steel tube
- Universal mounting plate
- Galvanized steel
Description
- Boom type
- Double sensor boom for mounting first class anemometers on third-party lattice towers.
- Applications
- Wind resource assessment; where long offset distances are required
- Sensor compatibility
-
Double horizontal boom mounts any pair of the following sensors with 120 degree orientation between them:
- WindSensor P2546-OPR Anemometer
- Thies First Class Advanced Anemometer (must also use one Thies Adapter, #9344)
- Tower compatibility
-
Lattice Towers with:
- Face width between 305 mm (12") and 610 mm (24")
- 38 mm (1.5") tube diameter
Installation
- Mounting
-
- Boom attaches to tower with stainless steel hose clamps
- Sensor mounts to boom with set screw and cotter pin
- Tools required
-
- 5/16 inch hex driver or flat blade (-) screwdriver for hose clamps
- Phillips head (+) screwdriver to mount sensor
- Recommended for installation
-
- Electric drill with 5/16 nut driver bit for tightening hose clamps
- Sheet metal shears or similar for trimming hose clamps
Environmental
- Lifespan
- 2 years +
Physical
- Overall boom length
- 2.4 m (95")
- Boom diameter
- 25 mm (0.98") at sensor mount location
- Offset height
-
Windsensor cup height above horizontal boom arm:
508 mm (20.0")
Thies cup height above horizontal boom arm:
514 mm (20.2")
Materials
- Boom
- 15.8 mm (0.625") galvanized steel tube
- Universal mounting plate
- Galvanized steel
Description
- Boom type
- Sensor boom for mounting first class anemometers on third-party lattice towers.
- Applications
- Wind resource assessment; where long offset distances are required.
- Sensor compatibility
-
Single horizontal boom mounts the following sensor:
- NRG S1
- Tower compatibility
-
Lattice Towers with:
- Face width between 305 mm (12") and 610 mm (24")
- 38 mm (1.5") tube diameter
Installation
- Mounting
-
- Boom attaches to tower with stainless steel hose clamps
- Sensor mounts to boom with set screw and cotter pin
- Tools required
-
- 5/16 inch hex driver or flat blade (-) screwdriver for hose clamps
- Phillips head (+) screwdriver to mount sensor
- Recommended for installation
-
- Electric drill with 5/16 nut driver bit for tightening hose clamps
- Sheet metal shears or similar for trimming hose clamps
Environmental
- Lifespan
- 2 years +
Physical
- Overall boom length
- 2.4 m (95")
- Boom diameter
- 25 mm (0.98") at sensor mount location
- Offset height
-
S1 cup height above horizontal boom arm:
508 mm (20.0")
Materials
- Boom
- 15.8 mm (0.625") galvanized steel tube
- Universal mounting plate
- Galvanized steel
Product Support
Customer Service
+1 802-482-2255
Mon – Fri: 8:30am – 5:00pm Eastern Time (GMT-5)