Skip to navigation Skip to content
Quick Guide Videos

T60 Temperature Sensor | Initial Setup


  1. Lay out accessories and required tools:

    Needle Nose Pliers
    Small NRG screw driver
    ¼” nut driver 

  2. Remove sensor from box.

  3. Use hose clamps to attach to tower and then tighten.

  4. Insert cable into shelter box. Wire the cable into the data logger.

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
PVT1 PV Temperature Sensor
60 + T60C Temperature Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.