LOGR-S | CONFIGURING A SERIAL SENSOR

To configure a serial sensor on LOGR-S:

1. Navigate to the Sensors > Serial Sensor Setup page

2. Select COM-A or COM-B from Port dropdown (Default is COM-A)

3. Select desired sensor model from Sensor Type dropdown

Note: Sensor Description will auto-populate – edit as desired

4. Enter client address

Note: The sensor itself must be configured with matching client address value in order to establish serial communication

5. Enter serial number

6. Click Save

7. Listen for an audible alert (two beeps) from LOGR-S confirming sensor has been configured