LOGR-S | CALCULATED CHANNEL - ZENITH ANGLE

To configure a Calculated Channel for Solar Zenith Angle 

1. Hover over the Sensors tab > Calculated Channels

2. Select Configure on the desired Channel

3. Select Solar Zenith Angle on the Calculation dropdown

Note: Latitude and Longitude will auto-populate if the Logger’s System Configuration has been completed

4. Select Save

5. Listen for an audible alert (two beeps) from the LOGR-S confirming calculated channel has been configured

6. Confirm the calculation is on the desired channel on the Calculated Channels page

7. Confirm a real time reading from the Status tab > Sensor Outputs