Skip to navigation Skip to content
Quick Guide Videos


To configure a Calculated Channel for DNI

1. Hover over the Sensors tab > Calculated Channels

2. Select Configure on the desired channel

3. Select DNI (Direct normal irradiance) on the Calculation dropdown

4. Select GHI and DHI input channels.

Note: Latitude and Longitude will auto-populate if the Loggers System Configuration has been completed

5. Select Save

6. Listen for an audible alert (two beeps) from the LOGR-S confirming calculated channel has been configured

7. Confirm the calculation is on the desired channel on the Calculated Channels page

8. Confirm a real time reading from the Status tab > Sensor Outputs

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.