LOGR-S | CALCULATED CHANNEL - AZIMUTH ANGLE

To configure a Calculated Channel for Azimuth Angle:

1. Navigate to Sensors > Calculated Channels

2. Select Configure on the desired Channel

3. Select Azimuth Angle from the Calculation dropdown menu

Note: Latitude and Longitude will auto-populate if the Logger’s System Configuration has been completed

4. Click Save

5. Listen for an audible alert (two beeps) from LOGR-S confirming the calculated channel has been configured

6. Confirm the calculation is on the desired channel on the Calculated Channels page

7. Confirm a real-time reading from the Status > Sensor Outputs page