Skip to navigation Skip to content
FAQs

Programming the iPack to call your ISP

NRG provides software and a configuration cable to enable your office PC to configure your iPack. The configuration should be performed in your office prior to installation - it is a good idea to make sure everything is working and you are receiving emails before installing the logger into a remote location.

The iPack is not configurable using the keypad on the logger itself. NRG is investigating this possibility for a future update.

 

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
BP60 + BP60C Barometric Pressure Sensor
HybridMC Anemometer + Vane
HybridXT Anemometer + Vane
PVT1 PV Temperature Sensor
T60 + T60C Temperature Sensor
R1 Pyranometer
R2 Pyranometer
RH5X Relative Humidity Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.