Skip to navigation Skip to content
FAQs

How do I configure SymphoniePRO to stay powered on and listening for connections continuously (24/7)?

SymphoniePRO, unlike previous versions of Symphonie loggers, allows a direct connection to a logger from an office PC using the MetLink protocol when configured with a public or private static IP address (ask your wireless service provider for this service). In some cases, there is grid power available at the site and therefore the modem can be left on continuously. To do this, in the “Schedules” tab, go to “MetLink Logger Listening,” set Frequency to 10 minutes and the Duration to “continuous.” This should only be done when there is grid power available to keep the system powered 24/7.

 

Download Calibration Reports

Our Calibration Report Retriever Tool is a comprehensive database of reports for the following products:

NRG Anemometers
110S Temperature Sensor
200M Wind Vane
200P Wind Vane
BP20 Barometric Pressure Sensor
HybridMC
HybridXT
PVT1 PV Temperature Sensor
60 + T60C Temperature Sensor
Thies First Class Advanced Anemometer
WindSensor P2546-OPR Anemometer

Tech Support

Whether you are troubleshooting in the field or learning how to install a product, we are here for you.