NRG Systems

34m TallTowerâ„¢

The 34m TallTower is ideal for smaller-scale or remote distributed wind energy projects where the installation of taller towers may not be possible.

  No Paint, Anchors, Ginpole (#4257)
Installation  
Tools required See manual available in the Dcouments + Downloads tab:
34m TallTower Installation
Winch required 4300 - Winch | 4500 lb. - 34m Towers
Ginpole required Included
Physical  
Erected height 34.57 m (113 feet 5 inches)
Tube diameter 152 mm (6 inches)
Footprint 18.29 m (60 feet)
Guyset levels
  • 8.4 m (27 feet 5 inches)
  • 16.4 m (53 feet 11 inches)
  • 24.5 m (80 feet 5 inches)
  • 32.6 m (106 feet 11 inches)
Materials  
Tube Galvanized steel
Guy wires 4.8 mm (3/16 inch) 7x7 galvanized aircraft cable
Guy rings Galvanized steel
Anchors Screw in, 152mm (6 inch) diameter, 1.7m (66 inch) long galvanized steel
Baseplate Galvanized steel
Wire rope clips 4.8 mm (3/16 inch) galvanized steel
Structural  
Winch Load 8896 N (2000 lbs)
Safety features  
Obstruction marking None

NRG Systems • 110 Riggs Road • Hinesburg, Vermont 05461 • +1 802-482-2255 • info@nrgsystems.com