The 34m TallTower is ideal for smaller-scale or remote distributed wind energy projects where the installation of taller towers may not be possible.
Based on robust, 152 mm (6”) diameter tubular construction, the 34m TallTower maximizes portability without compromising tower strength, allowing for reliable data collection at even the hardest-to-reach sites. Low material costs make this tower one of our most economical resource assessment options.
Add a SymphoniePLUS®3 Data Logger and a Symphonie Sensor Kit to your order to complete your wind resource assessment system and enjoy the savings of NOW System pricing.
- Strong steel tube construction
- Compact Envirocrate™ packaging
In the Box
- 34 meter tilt-up tower
- Steel baseplate
- Pre-measured guy wires
- 17 bright yellow guy wire guards
- Screw-in anchors
- Necessary hardware, ginpole, and instructions for assembly
Specifications Print Specs
|34m TallTower | No Paint, Anchors, Ginpole (#4257)|
See manual available in the Dcouments + Downloads tab:
34m TallTower Installation
|Winch required||4300 - Winch | 4500 lb. - 34m Towers|
|Erected height||34.57 m (113 feet 5 inches)|
|Tube diameter||152 mm (6 inches)|
|Footprint||18.29 m (60 feet)|
|Guy wires||4.8 mm (3/16 inch) 7x7 galvanized aircraft cable|
|Guy rings||Galvanized steel|
|Anchors||Screw in, 152mm (6 inch) diameter, 1.7m (66 inch) long galvanized steel|
|Wire rope clips||4.8 mm (3/16 inch) galvanized steel|
|Winch Load||8896 N (2000 lbs)|
Mon – Fri: 8:30am – 5:00pm Eastern Time (GMT-5)
Anchor - Rock
Use these anchors to secure TallTowers in solid rock.
Cable Ball Set
Improve the visibility of your met tower with durable cable balls.
Winch | 34m Towers
Reliably install 34m TallTowers™ with this compact electric winch.
Protect your sensors and loggers from electrostatic discharge with a purpose-built grounding kit.
Guy Wire Guards
Mark and protect your TallTower™ guy wires with high visibility guards.
Anchor - Screw-In
Use these anchors to secure NRG TallTowers in normal clay soil without many rocks.
Anchor - Arrowhead
Use these anchors to secure TallTowers in rocky soil.
Mounting Boom | 1.53m (60.5"), Tubular
Mount your anemometers and wind vanes on NRG TallTowers™.