Skip to navigation Skip to content

110S Temperature Sensor

Discontinued product. See product page for details.

  • 110S Temperature Sensor

NOTE: THE 110S TEMPERATURE SENSOR HAS BEEN DISCONTINUED AS OF JANUARY 2020. PLEASE CONSIDER THE T60 TEMPERATURE SENSOR FOR YOUR MEASUREMENT NEEDS. PLEASE SEE THIS END-OF-LIFE ANNOUNCEMENT FOR MORE DETAILS OR CONTACT US DIRECTLY WITH QUESTIONS. 

The 110S is ideally suited for the temperature measurement requirements of remote wind and solar energy studies. Recommended uses of the data from this sensor include calculating energy density calculations; monitoring air temperature; calculating atmospheric stability conditions; identifying icing conditions in cold climates; and estimating PV panel efficiency, which is temperature dependent.

A calibrated version, the 110SC, is available when the lowest uncertainty is the priority. It is suggested for differential temperature measurements, where two temperature sensors are deployed on the same tower.

This sensor includes an internal reference, amplifiers, and linearization enclosed in a six-plate UV-stabilized radiation shield. The universal mounting assembly connects quickly to any pipe or tower.

The sensor comes with a potted 5 m, 67 m or 90 m sensor cable. If you require a different cable length, please contact us.

Please call us at +1 802-482-2255 for specifications.

Hose Clamps

Hose Clamps

Secure mounting booms to NRG TallTowers™ with hose clamps sized specifically for your tower tube.

Symphonie® SCM Card

Symphonie® SCM Card

Condition your sensor’s output signal so that a SymphoniePLUS3 Data Logger can read it by installing a Symphonie Signal Conditioning Module (SCM).