| Description |
|
Instrument type
|
n/a
|
Internet-enabled remote communication and autonomous power module for SymphoniePRO data loggers
|
n/a
|
Internet-enabled remote communication and autonomous power module for SymphoniePRO data loggers
|
|
Accessory type
|
Internet-enabled remote communication and autonomous power module for Symphonie® series data loggers
|
n/a
|
Internet-enabled remote communication and autonomous power module for SymphoniePRO® data loggers
|
n/a
|
|
Applications
|
- Wind and solar resource assessment and forecasting
- Enables internet features for SymphoniePRO where Verizon LTE data service is available
- Frequency Bands (MHz): 700 (B13)/AWS 1700 (B4)/1900 (B2)
- Certified on the Verizon network in the USA
|
- Wind and solar resource assessment and forecasting
- Enables internet features for SymphoniePRO where cellular data services are available:
- LTE FDD-4G: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28
- LTE TDD-4G: B38/B39/B40/B41
- WCDNA-3G:B1/B2/B4/B5/B6/B8/B19
- GSM-2G: B2/B3/B5/B8
- Worldwide
|
Wind and solar resource assessment and forecastingEnables internet features for SymphoniePRO where 4G LTE (TDD) cellular data services are availableFrequency Bands: - LTE FDD-4G: B1/B3/B5/B8
- LTE TDD-4G: B38/B39/B40/B41
- WCDNA: B1/B8
- TD-SCDMA-3G: B34/B39
- CDMA-3G: BC0
- GSM-2G: 900/1800MHz
|
- Wind and solar resource assessment and forecasting
- Enables internet features for SymphoniePRO where cellular data services are available:
- LTE FDD-4G: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28
- LTE TDD-4G: B38/B39/B40/B41
- WCDNA-3G:B1/B2/B4/B5/B6/B8/B19
- GSM-2G: B2/B3/B5/B8
- Worldwide
|
|
Instrument compatibility
|
Symphonie series data loggers
|
SymphoniePRO data loggers
|
SymphoniePRO data loggers
|
SymphoniePRO data loggers
|
|
Functions
|
- Enables remote MetLink connections for real-time two-way communication, including automated data delivery, firmware updates, and/or configuration updates to data logger and iPackGPS
- GPS time synchronization
- Cellular band and operator management via SymphoniePRO Desktop Application
- Automatic transfer of logged data via email
- Automatically updates latitude, longitude, and altitude settings in the data logger
- GPS position viewer
- iPackGPS status and event reporting
- Cellular signal confirmation indicator
- Accepts remote firmware updates
- Automatic real-time clock setting from internet time server
- Remote parameter updates of Symphonie series data loggers and iPackGPS
- Ability to disconnect a call in progress
- Event log viewer
- Includes rechargeable battery and PV charge controller for the data logger
|
- Enables remote MetLink connections for real-time two-way communication, including automated data delivery, firmware updates, and/or configuration updates to data logger and iPackGPS
- GPS time synchronization
- Automatic transfer of logged data via email
- Automatically updates latitude, longitude, and altitude settings in the data logger
- GPS position viewer
- iPackGPS status and event reporting
- GSM/3G/4G (cellular) signal confirmation indicator
- Accepts remote firmware updates
- Automatic real-time clock setting from internet time server
- Remote parameter updates of SymphoniePRO data loggers and iPackGPS
- Ability to disconnect a call in progress
- Event log viewer
- Includes rechargeable battery and PV charge controller for the data logger
|
- Enables remote MetLink connections for real-time two-way communication, including automated data delivery, firmware updates, and/or configuration updates to data logger and iPackGPS
- GPS time synchronization
- Automatic transfer of logged data via email
- Automatically updates latitude, longitude, and altitude settings in the data logger
- GPS position viewer
- iPackGPS status and event reporting
- GSM/3G/4G (cellular) signal confirmation indicator
- Accepts remote firmware updates
- Automatic real-time clock setting from internet time server
- Remote parameter updates of SymphoniePRO data loggers and iPackGPS
- Ability to disconnect a call in progress
- Event log viewer
- Includes rechargeable battery and PV charge controller for the data logger
|
- Enables remote MetLink connections for real-time two-way communication, including automated data delivery, firmware updates, and/or configuration updates to data logger and iPackGPS
- GPS time synchronization
- Automatic transfer of logged data via email
- Automatically updates latitude, longitude, and altitude settings in the data logger
- GPS position viewer
- iPackGPS status and event reporting
- GSM/3G/4G (cellular) signal confirmation indicator
- Accepts remote firmware updates
- Automatic real-time clock setting from internet time server
- Remote parameter updates of SymphoniePRO data loggers and iPackGPS
- Ability to disconnect a call in progress
- Event log viewer
- Includes rechargeable battery and PV charge controller for the data logger
|
| Data Collection |
|
Software
|
SymphoniePRO Desktop Application
|
Configuration via data logger desktop software on Windows PC (SymphoniePRO Desktop Application (SPD))
|
Configuration via data logger desktop software on Windows PC (SymphoniePRO Desktop Application (SPD))
|
Configuration via data logger desktop software on Windows PC (SymphoniePRO Desktop Application (SPD))
|
|
Data delivery
|
- Data delivery via SMTP email and/or MetLink connections
- Configuration changes and firmware updates administered via MetLink connections
- Test functions for all data delivery methods, with access to these features from both the logger LCD and SymphoniePRO Desktop Application
|
- Data delivery via SMTP email and/or MetLink connections
- Configuration changes and firmware updates administered via MetLink connections remotely or locally via logger USB connection.
|
- Data delivery via SMTP email and/or MetLink connections
- Configuration changes and firmware updates administered via MetLink connections remotely or locally via logger USB connection
|
- Data delivery via SMTP email and/or MetLink connections
- Configuration changes and firmware updates administered via MetLink connections remotely or locally via logger USB connection.
|
| Configuration |
|
User interface
|
- Status reporting on data logger front panel
- Configuration via desktop software on Windows PC
|
- Status reporting via data logger user interface
- Configuration via data logger desktop software on Windows PC (SymphoniePRO Desktop Application (SPD))
|
- Status reporting via data logger user interface
- Configuration via data logger desktop software on Windows PC (SymphoniePRO Desktop Application (SPD))
|
- Status reporting via data logger user interface
- Configuration via data logger desktop software on Windows PC (SymphoniePRO Desktop Application (SPD))
|
|
Configurable parameters
|
- Internet Service Provider settings
Other settings (schedule, SMTP, etc.) stored in data logger allowing minimal disruption to settings in the event of iPack swap
|
- AT&T LTE-G ready
- Call interval range: 10 minutes - 14 days
- Internet Service Provider settings
- Optional 'No Partial Files' setting
- Up to three (3) email addresses
|
- Call interval range: 10 minutes - 14 days
- Internet Service Provider settings
- Optional 'No Partial Files' setting
- Up to three (3) email addresses
|
- WindLinx ready
- Call interval range: 10 minutes - 14 days
- Internet Service Provider settings
- Optional 'No Partial Files' setting
- Up to three (3) email addresses
|
| Connections |
|
Communication ports
|
n/a
|
QMA (f) connector for GPS antenna- SMA (f) connector for cellular antenna
|
n/a
|
QMA (f) connector for GPS antenna- SMA (f) connector for cellular antenna
|
| Power requirements |
|
Batteries
|
One (1) built-in 12 V Sealed Lead-Acid (SLA) battery with 2200 mA-hr rating
|
One (1) built-in 12V Sealed Lead-Acid (SLA) battery with 2200 mA-hr rating
|
One (1) built-in 12 V Sealed Lead-Acid (SLA) battery with 2200 mA-hr rating
|
One (1) built-in 12V Sealed Lead-Acid (SLA) battery with 2200 mA-hr rating
|
|
External power input
|
External battery input (12 to 14 V, 500 mA max.)
|
External battery input (12 to 14 V, 500 mA max.)
|
n/a
|
External battery input (12 to 14 V, 500 mA max.)
|
|
External solar input
|
12 V (nominal) solar PV panel or external power supply (15 to 28 V) 1 A max.
|
12 V (nominal) solar PV panel or external power supply (15 to 28 V), 1 A max.
|
12 V (nominal) solar PV panel or external power supply (15 - 24 V)
|
12 V (nominal) solar PV panel or external power supply (15 to 28 V), 1 A max.
|
|
Other
|
External battery input (12 to 14 V, 500 mA max.)
|
n/a
|
External battery (12 - 14 V)
|
n/a
|
| Installation |
|
Mounting
|
- iPack stacks with Symphonie data logger using long logger mounting screws (included)
- Logger and iPackGPS attach to logger mounting bracket; Keyed slots allow for easy installation/removal in shelter box
- Standard cellular antenna is magnetically mounted to top of shelter box
- GPS antenna is magnetically mounted to top of shelter box
- An optional 15 W solar PV panel (sold separately) mounts to your tubular tower with supplied hose clamps
|
- iPackGPS attaches to back of SymphoniePRO data logger with (4) long logger mounting screws
- Standard multi-band cellular antenna is magnetically mounted to top of shelter box
- GPS antenna is magnetically mounted to top of shelter box
- Symphonie Solar PV panel 15W (optional) available with lattice or tubular mount for NRG towers.
|
- iPackGPS attaches to back of SymphoniePRO data logger with (4) long logger mounting screws
- Standard multi-band cellular antenna is magnetically mounted to top of shelter box
- GPS antenna is magnetically mounted to top of shelter box
- Symphonie Solar PV panel 15 W (optional) available with lattice or tubular mount for NRG towers
|
- iPackGPS attaches to back of SymphoniePRO data logger with (4) long logger mounting screws
- Standard multi-band cellular antenna is magnetically mounted to top of shelter box
- GPS antenna is magnetically mounted to top of shelter box
- Symphonie Solar PV panel 15W (optional) available with lattice or tubular mount for NRG towers.
|
|
Tools required
|
8 mm (5/16") wrench or nut driver for mounting screws
|
n/a
|
8 mm (5/16") wrench or nut driver for mounting screws
|
n/a
|
|
Accessories
|
Cellular antenna and GPS antenna included
|
GPS antenna and cellular antenna (both included)
|
Cellular antenna and GPS antenna included
|
GPS antenna and cellular antenna (both included)
|
| Physical |
|
Connections
|
- Data connection to iPack connector on rear of data logger
- Two (2) screw terminals for solar PV panel or external power supply input
- Two (2) screw terminals for external battery
- One (1) screw terminal for earth ground pre-wired for connection to data logger earth ground stud
- Cellular antenna connector SMA female
- GPS antenna connector QMA female
- Programming port connection via data logger programming adapter, or USB in case of SymphoniePRO
|
n/a
|
- Two (2) screw terminals for solar PV panel or external power supply input
- Two (2) screw terminals for external battery
- One (1) screw terminal for earth ground pre-wired for connection to data logger earth ground stud
- Cellular antenna connector SMA female
- GPS antenna connector QMA female
|
n/a
|
|
Dimensions
|
165 x 222 x 51mm ( 6.5 x 8.75 x 2.0 inches)
|
165 x 222 x 51 mm (6.5 x 8.75 x 2.0 inches)
|
165 x 222 x 51mm (6.5 x 8.75 x 2.0 inches)
|
165 x 222 x 51 mm (6.5 x 8.75 x 2.0 inches)
|
| Materials |
|
Enclosure
|
- Weather-proof polycarbonate plastic
- IP65 Rated
|
- Weather-proof polycarbonate plastic
- IP65 Rated
|
- Weather-proof polycarbonate plastic
- IP65 Rated
|
- Weather-proof polycarbonate plastic
- IP65 Rated
|
| System requirements |
|
Computer
|
Windows PC with desktop software for applicable data logger model:- SymphoniePRO Desktop Application for SymphoniePRO Data Logger
|
n/a
|
Windows PC with SymphoniePRO Desktop Application (SPD) required for configuration
|
n/a
|
|
Operating system
|
- iPackGPS Firmware | SymphoniePRO
- iPackGPS Firmware | SymphoniePLUS3
- SymphoniePRO Desktop Appliation requires Windows 7 or later
|
n/a
|
SymphoniePRO Desktop Application requires Windows 7 or higher
|
n/a
|
|
Related hardware
|
- iPack Programming Kit (Item 3368)
- Universal iPack Charger (Item 3615; included in 3368)
|
n/a
|
- Symphonie Solar PV panel 15 W with lattice (Item 9111) or tubular mount (Item 9112)
- Universal iPack Charger (Item 3615; included in 3368)
|
n/a
|