80m Sensor and SymphoniePLUS®3 Logger Kit for Lattice Tower
|
Item Number:
|
5503
|
|
Price:
|
$6,325.00 USD
|
Features
Support
- A complete, integrated system configured for lattice towers. Kit includes a reliable SymphoniePLUS3 data logger with six calibrated NRG #40C anemometers and two NRG #200P wind vanes. This configuration provides for three levels of precise wind measurement and also includes a temperature probe for monitoring air temperature at the site.
SymphoniePLUS3 Data Logger
The core of NRG System’s complete measurement systems approach.
-
SymphoniePLUS3 is based upon the reliable Symphonie data logger, the wind industry’s first Internet-enabled wind resource assessment data logger.
- Rugged and proven design means data is reliably collected and safely stored; survives even in extreme conditions.
- Simple to program and install – only minimal training required.
- Expand your measurement studies using three 'Flex' channels that support both digital/counter and analog sensors; 15 channels total.
- Built-in digital/counter channels (6) automatically configure to non-NRG Systems sensors without the use of an additional SCM card.
- Data is sampled every second, averaged and time-stamped every 10 minutes, and stored on an SD Card.
- Automate transfer of site data with your choice of Symphonie iPack communication modules.
SymphoniePLUS3 supports up to nine anemometers total: either NRG Systems #40C anemometers or non-NRG digital pulse or reed switch anemometers. Easily add more NRG Systems #40C anemometers to your system by following the Quicklinks below and then adding the items to your Shopping Cart:
This system is intended for use with lattice tower systems, such as the Rohn 25 or 45G.
System configuration includes:
- NRG SymphoniePLUS3 Data Logger - Qty. 1
- Symphonie Shelter Box - Qty. 1
- NRG #40C Anemometer - Qty. 6
- NRG #200P Direction Vane - Qty. 2
- NRG #110S Temperature Sensor - Qty. 1
- Sensor Terminal Boot - Qty. 2
- NRG #110S SCM Card - Qty. 1
- 113” Heavy-Duty (HD) Sensor Mounting Boom - Qty. 8
- 16" Stub Mast - Qty. 8
- Sensor Cable, 2C, 20 gauge (85m) - Qty. 2
- Sensor Cable, 2C, 20 gauge (75m) - Qty. 2
- Sensor Cable, 2C, 20 gauge (67m) - Qty. 2
- Sensor Cable, 3C, 20 gauge (85m) - Qty. 1
- Sensor Cable, 3C, 20 gauge (75m) - Qty. 1
- Necessary Mounting Hardware (Brackets, U-bolts, and Hose Clamps)
Approximate weight of kit: 75 kgs (165 lbs)
Click here to see a mounting diagram.
* NRG Systems does not manufacture or sell lattice tower systems.
|
|
|
|
|
|
NRG #40C Anemometer, Calibrated
The industry standard anemometer used worldwide. Constructed of rugged Lexan cups molded in one piece for repeatable performance. Includes calibration certificate.
Quantity:
6
|
|
|
NRG #200P Wind Direction Vane, 10K, With Boot
The industry standard wind direction vane used worldwide. Thermoplastic and stainless steel components resist corrosion and contribute to a high strength-to-weight ratio.
Quantity:
2
|
|
|
NRG #110S Temperature Sensor with Radiation Shield
Durable integrated circuit temperature sensor provides a high level voltage output signal. Ideal for collecting temperature data for energy density calculations and monitoring air temperature at remote sites.
Quantity:
1
|
|
|
|
Symphonie SCM Card for #110S
Signal Conditioning Module (SCM) is compatible with the Symphonie NRG Logger to accommodate one NRG #110S Temperature sensor.
Quantity:
1
|
|
|
|
|
|
|
|
| |
|
|
|
Please enter a quantity between 1 and 9999.
|
Related Items
|
|